Customer Service
+8618666881028
Expert of Static Control
Category

Double Station ESD Wrist Strap Monitor

In the process of the electronic production , the friction could generate several thousand volts static electricity instantaneously, which may damage the delicate and small electronic parts. Therefore, the electrostatic discharge protection and grounding are important. Just simply ground a wire and cannot meet the static electricity protection requirements. Anti-static wrist straps in the work, because of frequent swinging, bending, winding and other actions, even apparently the anti-static wrist strap is good, in fact, it may have problems. If static electricity can not be completely excluded, our electronic components might be inexplicably damaged, which will bring us a lot of waste of materials and working hours. Therefore, using a real-time alarm to monitor the wrist strap grounding condition can reduce and prevent various defects caused by electrostatic discharge during the production process.

0.00
0.00
  
Product Description

In the process of the electronic production , the friction could generate several thousand volts static electricity instantaneously, which may damage the delicate and small electronic parts. Therefore, the electrostatic discharge protection and grounding are important. Just simply ground a wire and cannot meet the static electricity protection requirements. Anti-static wrist straps in the work, because of frequent swinging, bending, winding and other actions, even apparently the anti-static wrist strap is good, in fact, it may have problems. If static electricity can not be completely excluded, our electronic components might be inexplicably damaged, which will bring us a lot of waste of materials and working hours. Therefore, using a real-time alarm to monitor the wrist strap grounding condition can reduce and prevent various defects caused by electrostatic discharge during the production process.


Features:
1.Real-time monitor then condition of the operator's wearing of the wrist strap and the grounding, and automatically alert when an abnormal situation occurs.
2. Easy to use, can correctly judge the condition of grounding wires and the workbench.
3. The test parameters can be set as required, generally set to 1.068-2.0MΩ (±5%) according to ESD standard, and the monitoring parameters can also be set as required.
4. Microcomputer chip control, free debugging, plug and play.
5. Good reliability and strong anti-interference ability.
6. High sensitivity, when the static discharge path fails ≥ 0.1 seconds, the monitor will alarm.
Installation:
1. Install the anti-static wrist strap monitor under workbench.
2. Wear the anti-static wrist strap close to the skin, and insert the plug of the strap into the input hole.
3.Connect the crocodile clip to the ground.
4. Plug on the monitor, and press the power switch.
Operation Guide:
Normal state: green light is on.
Alarm status: alarm sound and red light are on, should promptly check and deal with possible faults:
1,The wrist strap is detached.
2,The wrist strap and the hand contact are loose, and the wrist strap needs to be close to the skin.
3,dry skin, anti-static oil on the skin.
4,Wrist strap is damaged, replace the wrist strap.
5,Check the grounding system.
Double station wrist strap monitor specification:
Input voltage AC220V/110 turn 6V
Input current 0.3A 
Power 1.8W
Precision 1.068MΩ ±5% 
Accessory 1 AC adapter,1 grounding wire
Size 135*73*20mm

Request a quote