1. Power supply: 9V battery or special AC coupling adapter power supply (8-12VDC)
2. Solid-state test touch, no mechanical damage to button type keys.
3. Access control contact switch output: voltage≦400V (peak, DC or AC) switching power≦130mA; Contact resistance ﹤30Ω
4. Pass the test: the contact is closed. The test fails: the contact is not closed.
5. Support single/dual wrist strap test and hand/shoe single or comprehensive test modes.
6. The upper and lower limits of the test resistance of electrostatic shoes and wrist straps can be adjusted through eight sets of DIP switches. The operation is simple, and customers can completely operate by themselves.
7. Support card/fingerprint/face recognition controller.
8. Support offline work, and can individually control channel gates, electric locks, and air shower series equipment.
9. It has the characteristics of fast test speed, stable data, beautiful appearance, and safe DC 8-12V power supply. The test value error is within ±10%, the factory default electrostatic value range and adjustable range are as follows:


Low value of electrostatic bracelet: 750KΩ High value: 35MΩ
(Control range: low value 100K/750KΩ high value 10M/35MΩ)
Electrostatic shoes Low value: 100KΩ High value: 100MΩ
(Adjustable range: low value 100/300/500/750KΩ high value 35M/100M/500M/1000MΩ)


10. The tester adopts micro current test to make the test more stable and the test data more accurate.
Environment requirements
Ambient temperature: 5-38℃, when the upper limit is 1000M, the temperature should be between 21-38℃.
Relative humidity: 10%-65% (no water vapor condensation), when the upper limit value is 1000M, the humidity cannot exceed 50% (no water vapor condensation)